RESETER CANON PIXMA MP145

RESETER CANON PIXMA MP145

it’s work as same as Canon MP 150 or MP 160,

This is the step :

Canon MP145

with the printer powered off but connected to a power source , you must:

1. Press stop/reset button, and then press [ON/OFF] button to restart

2. Press [ON/OFF] again and then press twice the stop/reset button.

3. Press [ON/OFF] & Stop/reset button together, this time to enter the repair status and power lights will be green,

4. Press stop/reset button 4x and warning lights will be go out in [ON/OFF]button.

5. Turn off the printer.( it must be turn off) and then turn it on again.

Use with your own risk ,

i’ll try this way and my Pixma MP145 not blink again.

The number of the Reset button pressing
LED Function Remarks
0 time Green Power off

1 time Orange Service pattern print

2 times Green EEPROM print

3 times Orange EEPROM reset

4 times Green Waste ink counter reset

5 Unplug cable power. (for MP145 / MP150)

6 Turn Off Power. (for MP160)

Error Code :
======================

E2-2 = No paper (ASF)

E3-3 = Paper jam

E4 = No ink

E5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properly

E8 = Waste ink absorber full, or platen waste ink absorber full

E9 = The connected digital camera / video camera does not support Camera Direct Printing

E14 = The Ink cartridges whose destination are wrong

E15 = Ink cartridge is not installed

E16 = Ink remaining is unknown

E16 -E19 = Failed to scan head alignment sheet

E22 = Carriage error

E23 = Paper feed error

E24 = Purge unit error

E25 = ASF(cam) sensor error

E26 = Internal temperature rise error

E27 = Waste ink absorber full or platen waste ink absorber full

E28 = Ink cartridge temperature rise error -

E29 = EEPROM error

E33 = Paper feed position error

E35 15 = USB Host VBUD overcurrent error – USB

E37 17 = Abnormal motor driver error

E40 20 = Other hardware error

E42 22 = Scanner error

TAMBAHAN
==============

ERROR E5

————–
E5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properly

1. Gunakan lap bersih dan lembab usapkan pada connector catrigenya pelan pelan sampai bersih.
Prinsip dasarnya tinta yang mengering atau tinta yang basah atau bahkan kerak yang ada di connector catrige akan mengganggu koneksi antara catrige dan rumah catrige yang berisi pin-pin banyak. sehingga catrige tidak bisa mendeteksi keberadaan catrige dengan sempurna.


2. Sedot kembali semua tinta yang ada di catrige dengan sangat pelan pelan sampai habis (di sedot di beberapa sisi sudah tidak ada tinta). gunakan tisu yang di celup air HANGAT (bukan panas) untuk membersihkan head. Baru setelah itu isi kembali tintanya dengan sepertiga isi. jangan sampai terisi separo atau bahkan penuh. Pasang kembali ke rumah catrigenya.

Possibly related posts: (automatically generated)

* CANON MP150 RESET CODES
* MERESET WASTE INK COUNTER PADA CANON MP160 DAN MP145
* Kode Error Canon MP160 dan MP145